Aironet PCI4810B Guide de l'utilisateur télécharger pdf (Page 26)

Section 2: Using the WinDGS Utilities

Select Card

This allows another installed Aironet Wireless LAN Adapter

Card to be chosen. The property screens will change to

reflect the parameters specific to each card type.

Load New Firmware

The firmware is contained in the card’s flash memory. Flash

memory allows for easy updating of the firmware as neces-

sary.

Upgrading Firmware for Windows 95, 98, and NT

The WinDGS program is used to load new firmware.

To load new firmware:

1. Make sure the PCI/ISA Card is up and running.

2. Select Commands.

3. Select Load New Firmware.

4. Select Look In....Use the drop down button to select

the appropriate path and image file.

5. Select Open. This will flash the card with the selected

image.

Edit Properties

WinDGS allows you to change the configuration parame-

ters of your currently installed Aironet 4800B Series Wire-

less LAN Adapter. See “Using Edit Properties” on page27

for details on this command.

Statistics

The Statistics screen shows the current statistics from the

PCI/ISA Card. Statistics are updated at the rate specified by

the Screen Update Timer. Clear the current statistics by

clicking on Reset. Exit the Statistics screen by clicking on

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 83 84

Pas de commentaire

Aironet PCI4810B Guide de l'utilisateur Page 26